4 DIY Maintenance Tips to Avoid High Furnace Repair Costs

Depending on factors such as the type and brand, a furnace is designed to serve you for 15-20 years on average. With proper maintenance, however, you can reap the sweeter fruits in terms of better performance and lifetime. What most property owners tend to forget is that proper maintenance helps in preventing expensive repairs. It all boils to the question of how much can be saved on your furnace. This will all depend on the measures you put in place regarding furnace maintenance. One of the best ways to ensure this is by having your furnace checked by a technician annually. However, this doesn’t mean that you can’t do some things on your own to take proper care of your heating equipment. In this case, here are 4 DIY maintenance tips to avoid high furnace repair costs, improve its performance, increase its energy efficiency, enhance your home’s comfort, and increase the unit’s lifetime.

1 > Perform Trial Runs With Your Furnace

Most homeowners tend to forget the heating equipment maintenance until the cold season arrives. However, one of the ways you can avoid costly furnace repair bills is to have a trial run for your system before the cold weather. This involves you flipping the switch on your furnace to observe and diagnose its performance. Check the flame elements from the side panels to know if they are heating up properly. For a unit that is working at par, the flaming elements should be blue and nicely even. When the unit is switched on, there should not be rattling noises.

2 > Check the Furnace Filters Regularly

Most furnaces have two air filters, one located at a centre place just closer to the thermostat and the other one inside the furnace near the blower component. The filters need to be regularly cleaned to minimize the accumulation of dust, which if unchecked may cause clogging, interfere with airflow and even damage valuable parts. You can do this after a span of every three months to improve your component’s efficiency and reduce the chances of needing repairs.

3 > Furnace Cleaning

Murray Anderson, inspection and cleaning are some of the most important steps in a proper Furnace Tune-up. When performing cleaning routines to your furnace, caution should be observed. The first thing is to ensure that the thermostat is back down and the furnace is cool. Also, always make sure that the circuit breaker that provides power to the furnace is off before cleaning. After confirming that the furnace is cool, remove the sides and have your vacuum with a long nozzle ready, this will rid of any accumulated dust over time. Have a dump rug to clean off the blower fan blades and on any other areas unreached by the vacuum. Check the oil caps at the ends of the central shafts from the blower fun, the oil caps vary depending on the make and model of furnaces, some are completely sealed. If the oil caps are not sealed, use a few oil drops.

4 > Check Exhaust Vent

Carbon monoxide from the furnace is carried by the exhaust vent outside. Regularly check to see if ice or snow is blocking it. The accumulation of this dangerous gas inside the furnace may cause system failure. As complicated as the result of this can be, it can be prevented by only ensuring that the exhaust vent is free from any blocking material.

There are a lot more furnace maintenance tips online, which you can borrow to ensure that you incur minimal energy costs; a longer lifespan to your furnace, fewer furnace repairsimproved indoor air quality and a peace of mind.